SilverStone Sugo SG05: The Mini-ITX Standard Bearer
by Dustin Sklavos on August 19, 2012 12:01 AM EST- Posted in
- SilverStone
- Mini ITX
- Cases/Cooling/PSUs
- HTPC
Testing Methodology
For testing Mini-ITX cases, we use the following standardized testbed in stock and overclocked configurations to get a feel for how well the case handles heat and noise.
| Mini-ITX Test Configuration | |
| CPU |
Intel Core i3-2120 (65W TDP) |
| Motherboard | Zotac Z68ITX-A-E |
| Graphics Card |
Intel HD 2000 IGP Zotac GeForce GTS 450 Eco (dedicated) ASUS GeForce GTX 560 Ti DCII TOP (dedicated extra) |
| Memory | 2x2GB Crucial Ballistix Smart Tracer DDR3-1600 |
| Drives |
Kingston SSDNow V+ 100 64GB SSD SilverStone Slimline DVD+/-RW Drive |
| CPU Cooler | SilverStone NT07-1156 with Cooler Master ThermalFusion 400 |
| Power Supply | Included 450W 80 Plus Bronze PSU |
Each case is tested with just the Core i3's integrated graphics as well as with a discrete graphics card. The system is powered on and left idle for fifteen minutes, the thermal and acoustic results recorded, and then stressed by running four threads (three with a dedicated GPU) in Prime95 (in-place large FFTs) on the CPU, and OC Scanner (maximum load) is run when the dedicated GPU is installed. At the end of fiteen minutes, thermal and acoustic results are recorded. If the enclosure has a fan controller, these tests are repeated for each setting. Ambient temperature is also measured after the fifteen idle minutes but before the stress test and used to calculate the final reported results.
We try to maintain an ambient testing temperature of between 22C and 24C. Non-thermal test results aren't going to be directly comparable to the finest decimal point, but should be roughly comparable and give a broader idea of how the enclosure performs.
Thank You!
Before moving on, we'd like to thank the following vendors for providing us with the hardware used in our testbed.
- Thank you to Puget Systems for providing us with the Intel Core i3-2120.
- Thank you to Zotac for providing us with the Z68ITX-A-E motherboard and GeForce GTS 450 Eco.
- Thank you to Crucial for providing us with the Ballistix Smart Tracer memory.
- Thank you to Kingston for providing us with the SSDNow V+ 100 SSD.
- And thank you to SilverStone for providing us with the NT07-1156 heatsink/fan combo.
Facebook
Twitter
RSS
70 Comments
View All Comments
Chaitanya - Sunday, August 19, 2012 - link
Could you do a comparative review of the some of the mini-ITX cases(thermaltake, coolermaster, silverstone, lian-li and bitfenix) available in market? as most of these cases look similar on the outside(except for the bitfenix one) I am interested to know how they stack up against each other in terms of usability and cooling performance.n13L5 - Sunday, August 26, 2012 - link
yes, would be nice.As far as I know, there isn't a better form factor + cooling concept case than the SG05 and its sucessors.
So, why haven't I bought one?
Cause Silverstone doesn't give them a nice build quality. Its iron, its got sharp edges inside and the plastic front had a crummy fit.
By far the greatest annoyance is, that Silverstone forces you into a crappy, non-modular PSU! Why oh why would you ever use a non-modular PSU in a tiny case where you want to avoid extra wires obstructing airflow???
A few years back, I went so far as posting the measurements and concept to Lian Li's support site, asking them to please make a form factor like that, so that we could finally have a high quality, slightly elongated version of the SG05...
wahaha686 - Saturday, September 8, 2012 - link
n13L5,I share your frustration towards the build quality of the SG05 and have plans to address the demand for an aluminum alternative to the SG05 (Kickstarter + batch custom order :p).
I'm interested in knowing 1) what Lian Li told you, 2) how serious you are about getting a new mini-itx case.
Let me know
sean.crees - Tuesday, September 18, 2012 - link
Modular PSU's take up more space because of the connector to the PSU chassis. When space is a premium, an extra inch or so can make a big difference in such a small enclosure. Plus it's easier (cheaper) to get higher effeciency in a PSU that is non modular due to resistive losses from extra inter connects. Not saying it cannot be done (obviously it can), but it would make the PSU more expensive, and the case it comes with more expensive.Personally i prefer steel enclosures. The weight difference is negligible once you load it up with electronics, but the steel panels resonate sound less than aluminum panels. Plus steel is cheaper. I know a lot of people in the silent PC field who HATE aluminum enclosures with a passion for this very reason and refuse to buy them. So while making it aluminum might make some buy it, it will make others not buy it, and in the end only result in a more expensive overall product.
Now i do agree a nicer (aluminum) front panel instead of plastic would be nice. Wouldn't affect sound quality since it would have steel behind it, and should only increase cost slightly, but make it look much more professional.
You have to remember, nothing is ever going to be perfect for everyone, and so they have to make compromises hoping to appeal to the widest possible group of potential customers. For the last 5 years or so, the SG05 has been the standard all other ITX enclosures are compared to, so i think the compromises Silverstone has made were the right ones.
wahaha686 - Monday, December 31, 2012 - link
n13L5,If you are still looking for an alternative to the SG05, I started a project with the help of Lian Li and SilverStone to build an alternative to the SG05.
The information can be found here:
http://hardforum.com/showthread.php?t=1717132
gandergray - Friday, February 8, 2013 - link
wahaha686:The NCase M1 is impressive. I hope you are able to achieve a production run. I'll support a funding effort.
Zhelus - Monday, August 12, 2013 - link
holy mother of god i just stumbled upon the meeting of the ncase m1 teamtechexperience - Thursday, September 12, 2013 - link
and now I, too, bear witness on this union. Can't believe I stumbled upon this after all these years.457R4LDR34DKN07 - Sunday, August 19, 2012 - link
I sprung for the sg08 and z77, design is very similar and due to the 130mm fan needed a right angle slimline SATA power adapter.krumme - Sunday, August 19, 2012 - link
Thank you Dustin for another excellent review.I like the appriciative style for the product and the consumer oriented approach instead of a hysterical or hidden angry style.
Mini itx cases is an interesting product at the moment. Ib and 28nm gpu iis one thing, but performance on many other components is just not interesting anymore. Who gives about 400Mb/s ssd og 550Mb/s or 60 or 90 iops, in an workload only a minority uses very seldom.
One of the forum members have a powercolor 7550 running inside a sg05, forum is down for maintenance now, so no link.
I am very interested in this case, but would like to get noise down. Can i just fit silverstones own 12mm low noise fan instead? or what else is needed?
Any chance silverstone will upgrade to the gold standard ps?
If this can be a message to silverstone reps, can we have a lower noise, higher efficiency deluxe version ? :) - i mean its pretty cheap as it is, you got all the other parts in house come on !